Linear Vibrating Screen
Production Capacity: 10-600 t/h.
Feeding Size: ≤200-≤300 mm
Linear Vibrating Screen for Sale
Linear vibrating screen also known as linear motion vibrating screen, is one type of vibrating screen machine, commonly used in industrial production. Linear vibration trajectories driven by twin motors to screen materials. Linear vibrating screen specializing in screening the materials of finer particle size and lower hardness. Linear vibrating screen can be screening material effectively, whether it is dry material, or whether it is wet material. And installation of multi-screens according to your demand, meet the production requirements of different production lines. Linear vibrating screen has the advantages of high screening accuracy, ruggedness, energy conservation, and environmental protection. AGICO also provides a circular vibrating screen, it is a screen material according to circular vibration mode. You can choose the right vibrating screen machine for you according to different vibration modes and parts. You can also contact AGICO to help you choose the most cost-effective equipment model.
Advantages of Linear Vibrating Screen
Simple Structure
The structure design of the linear vibrating screen is simple and easy to install and remove. In particular, it is easy to change the screen, It only takes 3-5 minutes to replace. Saving downtime efficiently, Ensuring the productivity of linear vibrating screen.
High Accuracy
The design of a linear vibrating screen can install multi-screens, each layer can be installed with screens of different apertures. Linear vibration trajectory allows the material to be evenly distributed on the screen. It is then screened through a multi-screen, so the screening is more accurate.
Wide-ranging Adaptability
A linear vibrating screen is suitable for screening material of fine grain sizes and lower hardness. Linear vibrating screens can be screening material effectively, whether it is granules, powders, or slurry. Widely used in the construction industry, agriculture, mining, etc.
High Efficiency
Our linear vibrating screen has a large screen area and is directly driven by the motor to sieve. With low energy loss and reduced energy consumption by 30%, the linear vibrating screen allows 24-hour assembly line operation, screening efficiency up to 96% or more.
Main Structure of Linear Vibrating Screen
Screen Box
Vibration Motors
Vibration Reduction Device
- Screen Box
The screen box is the core framework of the linear motion vibrating screen, it is welded from high-strength materials. There are screens and crossbars, providing space for the material to be screened.
- Screen Frame
The screen frame of the linear motion vibrating screen is fitted with a screen. The screen frame holds the screen in place and keeps the screen flat. The screen has many materials and the diameter of the hole to choose from, meeting the needs of screening grain sizes.
- Vibration Motors
Vibration motors are the power source for linear motion vibrating screens, usually installed on both sides of the screen box. They allow the screen box to generate linear vibration, and the vibration frequency and amplitude of vibration motors can be adjusted.
- Vibration Reduction Device
A vibration reduction device is installed on both sides or the bottom of a linear motion vibrating screen. It can reduce the impact of vibration on the equipment, extend service life, and reduce noise effectively.
How the Linear Vibrating Screen Works
The linear motion vibrating screen has two vibration motors to generate vibration. Two vibration motors generate a reverse excitation force at the same time. This will drive the screen box to do linear vibration. Material drops onto a screen from the feed port, under the vibration of the screen, the material is thrown up and down repeatedly, and moving forward. In the course of work, the material less than the screen hole falls onto the screen, and the material larger than the screen hole keeps moving forward and exclusion from the outlet. By setting multiple screens for linear motion vibrating screens, materials with different particle sizes are discharged from the corresponding discharge port. You can adjust the perspectives of Eccentric blocks for vibration motors to discharge vibration amplitude. The tilt angle of the screen is usually set from 0° to 7°.
Customized Screen
—— Customers can customize the screen according to their needs
Stainless Steel Screen
- Strong corrosion resistance, adapted to screening acidic, alkaline, or wet screening materials.
- Good abrasion resistance, able to withstand high-intensity work and long-term use.
- Precise screening holes for demanding screening tasks.
Punched Plate Screen
- High strength, the whole is processed by the metal plate.
- Suitable for screening larger particle sizes or heavy loads.
- Flat screen surface, smooth workmanship, less material adhesion, and clogging.
Rods Screen
- The screen surface consists of metal rods with large space, which is favorable for the passage of materials with large granularity.
- The rods screen has a simple structure and is easy to clean and dismantle.
- Metal rods are usually heat-treated for better wear resistance.
Polyurethane Screen
- Good flexibility, good shock absorption and noise reduction.
- Smooth screen holes can reduce the adhesion of materials and improve screening efficiency.
- Lightweight, effective for the equipment to reduce the burden, reduce energy consumption.
Purchase Process
Demand Analysis
The customer provides AGICO with basic information about the material, including type, particle size, humidity, viscosity, and so on. State the desired daily or hourly capacity, screening accuracy, and number of screen decks. Provide the dimensions of the site, power supply, and other conditions. Ensuring the suitability of linear vibrating screens.
Develop a Plan
AGICO’s specialized technicians recommend the appropriate configuration of the linear vibrating screen based on the information and requirements provided by the customer. If the customer has individual requirements, technicians provide customized solutions to ensure that the customer’s requirements are met. And make a detailed quote for the customer.
Equipment Production
Production of linear vibrating screens is done according to the requirements of the solution, customized products may require a wait of 1-4 weeks. After production, each linear vibrating screen undergoes a strict quality inspection to ensure that the quality of the equipment meets the standards before it is shipped to the customer.
Installation and Commissioning
AGICO will send professional technicians to the site to personally guide the installation of equipment. Debugging and commissioning of the linear vibrating screen after installation, ensure that the equipment can work stably. Technicians will also train operators. We are committed to repairing any problems with the linear vibrating screen free of charge during the warranty period.
Parameters of Linear Vibrating Screen
| Models | Screen Face Size length×width）(mm) | Screen layer | Screen size (mm) | Feeding size (mm) | Capacity (t/h) | Motor power (kw) | Vibration frequency (hz) | Total weight (kg) | Double- amplitude (mm) | Leaning angle of screen (°) | Body size |
|---|---|---|---|---|---|---|---|---|---|---|---|
| ZSG1237 | 3700×1200 | 1 | 4-50 | ≤200 | 10-100 | 5.5×2 | 16 | 2250 | 6-8 | 15 | 3800×2050×1920 |
| 2ZSG1237 | 3700×1200 | 2 | 4-50 | ≤200 | 10-100 | 5.5×2 | 16 | 3345 | 6-8 | 15 | 3800×2050×2200 |
| ZSG1443 | 4300×1400 | 1 | 4-50 | ≤200 | 10-150 | 5.5×2 | 16 | 4100 | 6-8 | 15 | 4500×3040×2500 |
| 2ZSG1443 | 4300×1400 | 2 | 4-50 | ≤200 | 10-150 | 5.5×2 | 16 | 4900 | 6-8 | 15 | 4500×3040×2700 |
| 3ZSG1443 | 4300×1400 | 3 | 4-50 | ≤200 | 10-150 | 5.5×2 | 16 | 5870 | 6-8 | 15 | 4500×3040×2820 |
| 2ZSG1548 | 4800×1500 | 2 | 5-50 | ≤200 | 15-200 | 7.5×2 | 16 | 5836 | 8-10 | 15 | 4800×3140×2814 |
| 3ZSG1548 | 4800×1500 | 3 | 5-50 | ≤200 | 15-200 | 7.5×2 | 16 | 6900 | 8-10 | 15 | 4799×3140×3014 |
| 2ZSG1848 | 4800×1800 | 2 | 5-50 | ≤300 | 50-500 | 7.5×2 | 16 | 6489 | 8-10 | 15 | 4799×3440×2814 |
| 3ZSG1848 | 4800×1800 | 3 | 5-50 | ≤300 | 50-500 | 7.5×2 | 16 | 7750 | 8-10 | 15 | 4799×3440×3014 |
| 4ZSG1848 | 4800×1800 | 4 | 5-50 | ≤200 | 50-500 | 11×2 | 16 | 8300 | 8-10 | 15 | 4799×3440×3503 |
| 2ZSG1860 | 6000×1800 | 2 | 5-150 | ≤300 | 80-600 | 11×2 | 16 | 9950 | 8-10 | 15 | 6000×3440×3326 |